 |
||||||||||||
|
||||||||||||
 |
||||||||||||
- FIT '05~09 HEXHEAD MODELS & 2010 R1200R
- WIDE COVERAGE; 5mm THICK
- TOUGH ENGINEERING POLYMER
X-Head Cylinder Guards are unique in the market - thick, tough, and wide to protect both the valve and spark plug covers. Molded in an impact modified nylon polymer, v.3.0 is upgraded with higher heat & chemical resistance. X-Heads protect a broad area & are the best looking solution available.
Included are stainless steel bolts with Nyloc threadlock patches so they stay tight. They fit with the following crash bars: BMW OEM; Adventure Designs crash bar extensions; Touratech; Hepco Becker; SW Motech. Does not fit Z-Tecknik. If your bars fit BMW's OEM cylinder guards, they will fit with X-Head. If your crash bars have had an impact, check that you have a minimum of 15mm clearance between the closest part of the left side valve cover and the inside of the bar.
For shipping outside the US please contact Katie - katie@machineart.com or 908.996.7210 x14 - to obtain a shipping cost and purchase total.
You may then pay via Paypal to sales@machineartmoto.com.